Be Safe Lock It Out Sign
Product code: PSS-ELEC-029
This motivational lockout safety sign encourages workers to adopt safe practices by framing lockout as a personal responsibility. The direct, action-oriented message reinforces behaviour change in busy workshops and maintenance areas.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
This motivational lockout safety sign encourages workers to adopt safe practices by framing lockout as a personal responsibility. The direct, action-oriented message reinforces behaviour change in busy workshops and maintenance areas.
Available in polypropylene and vinyl across two sizes (225×300 mm and 300×450 mm), the sign suits both permanent and temporary installations. Optional mounting holes simplify fitting. Trade accounts receive bulk discounts, and we deliver Australia-wide from Sydney.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-029 |
|---|---|
| Product | Be Safe Lock It Out Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
How does a motivational sign differ from a standard warning sign?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Is this sign AS 1319 compliant?
Yes, the sign meets AS 1319 standards for safety signage; however, it functions as a behavioural reinforcement tool rather than a primary hazard warning.
Which material is better for a high-traffic workshop?
Polypropylene is more durable in workshops with machinery vibration and occasional impact; vinyl is lighter and suits areas where signs are moved or rotated frequently.
Can I use this alongside other lockout signs?
Yes. Combine this motivational sign with your specific hazard and isolation point signs to create a comprehensive lockout communication strategy.
Do you offer custom messaging or branding?
Our standard message is proven and compliant; for custom text or company branding, contact our design team to discuss options and lead times.
