No Windsurfing (300mm Regulatory Circle) Sign
Product code: PSS-WS-BCH-0013
Regulatory pole-mounted prohibition circle (300 mm diameter) showing the windsurfer pictogram with red annulus, compliant with AS 2416.1 and state marine regulations. This sign is mandatory at marina entries, wildlife sanctuaries, and designated no-wind-craft zones where local authorities restrict windsurfing activity.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $3.18 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $35.00 | — |
| 5-9 | $32.20 | 8% off |
| 10-24 | $29.75 | 15% off |
| 25-49 | $26.60 | 24% off |
| 50-99 | $23.80 | 32% off |
| 100+ | $21.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $35.00 | — |
| 5-9 | $32.20 | 8% off |
| 10-24 | $29.75 | 15% off |
| 25-49 | $26.60 | 24% off |
| 50-99 | $23.80 | 32% off |
| 100+ | $21.00 | 40% off |
Product details
Regulatory pole-mounted prohibition circle (300 mm diameter) showing the windsurfer pictogram with red annulus, compliant with AS 2416.1 and state marine regulations. This sign is mandatory at marina entries, wildlife sanctuaries, and designated no-wind-craft zones where local authorities restrict windsurfing activity.
Aluminium-only construction (1.6 mm minimum) meets pole-mount regulatory conventions established under AS 1742 standards; polypropylene does not satisfy rigid mounting or durability requirements for public waterway installations. Pre-drilled holes accommodate standard pole diameters.
Designed for permanent outdoor deployment in exposed marine environments. Platinum Signs delivers Australia-wide; trade and local government accounts qualify for bulk pricing on multi-location orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-WS-BCH-0013 |
|---|---|
| Product | No Windsurfing (300mm Regulatory Circle) Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 300 x 300mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 300 x 300mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why is this aluminium-only?
Pole-mounted regulatory signs on public waterways must comply with AS 1742 pole-mount standards, which specify 1.6 mm aluminium minimum for structural integrity and corrosion resistance. Polypropylene lacks the rigidity and durability required for this application.
What pole diameter do the holes accommodate?
Standard pre-drilled holes suit 40–50 mm poles; contact us if your installation requires a different diameter and we can adjust before dispatch.
How long does aluminium last in a marine environment?
Marine-grade aluminium typically performs for 10+ years in coastal exposure with minimal maintenance; salt spray causes surface oxidation but does not compromise structural integrity.
Do you supply the mounting hardware?
We provide the drilled sign; you'll need stainless-steel U-bolts or pole-clamps (available from general hardware suppliers) to secure it to your pole.
Can I order multiple signs for different zones?
Yes — trade and government accounts receive volume discounts on orders of 3+ signs. Email your site locations and we'll provide a bulk quote.
