No Pushing Picto Sign
Product code: PSS-WS-PRH-0009
A pictogram-only prohibition sign meeting AS 2416.1, featuring the red annulus and pushing figure without text overlay. Designed as a secondary safety marker for high-risk pool-deck zones—slide entries and diving-board queues—where primary signage already displays full hazard information at the entrance.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
A pictogram-only prohibition sign meeting AS 2416.1, featuring the red annulus and pushing figure without text overlay. Designed as a secondary safety marker for high-risk pool-deck zones—slide entries and diving-board queues—where primary signage already displays full hazard information at the entrance.
Available in polypropylene or marine-grade aluminium, with three standard sizes to match your facility layout. Polypropylene suits indoor aquatic centres; aluminium handles outdoor splash and UV exposure. Lamination and pre-drilled holes are available for faster installation.
Trade accounts receive bulk discounts on multi-sign orders. Australia-wide delivery from Sydney.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-PRH-0009 |
|---|---|
| Product | No Pushing Picto Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the difference between this and a full No Pushing sign?
This picto has no text—just the red circle and figure. Use it as a secondary marker at slide queues or diving boards where the main hazard sign is already visible at the pool entrance, reducing visual clutter while reinforcing the rule.
Can I use polypropylene outdoors?
Yes, polypropylene is UV-stabilised and suitable for outdoor pools. Aluminium offers superior durability in high-splash zones and lasts longer in intense sun, but costs more.
Do you supply mounting hardware?
We pre-drill holes at no extra charge. You'll need your own fixings (stainless-steel bolts recommended for wet environments); we can advise on specifications if you contact our trade team.
What's the lead time for bulk orders?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
