No Jetski Picto Sign
Product code: PSS-WS-PRH-0011
An AS 2416.1 prohibition sign displaying a red annulus with PWC/jetski pictogram. Deployed in marine-park no-wake zones, swimming-area exclusions, environmental-protection waterways, and council-managed harbours to restrict high-speed watercraft in sensitive or congested areas.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
An AS 2416.1 prohibition sign displaying a red annulus with PWC/jetski pictogram. Deployed in marine-park no-wake zones, swimming-area exclusions, environmental-protection waterways, and council-managed harbours to restrict high-speed watercraft in sensitive or congested areas.
Material choice depends on environment: polypropylene for freshwater lakes and dams, marine-grade aluminium for saltwater marinas and coastal installations where corrosion is a concern. Four sizes allow flexible positioning across primary access points and perimeter fencing. Lamination and pre-drilled mounting holes are included as standard extras.
Trade customers benefit from bulk discounts and dedicated support. Nationwide delivery from Sydney.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-PRH-0011 |
|---|---|
| Product | No Jetski Picto Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Do I need state marine authority approval?
Public waterways require authorisation from your state regulator (NSW Transport Maritime, QLD MSQ, VIC Transport Safety Victoria). Private moorings and dams don't need approval, but check local by-laws first.
Should I pair this with No Water Skiing?
Yes—most state marine regulators treat jetski and water-skiing as a combined no-wake category. Displaying both signs together fully delineates the restricted zone and reinforces the rule.
What's the best size for a marina entrance?
600×900mm at the main gate or boat-launch area ensures visibility from 20+ metres away. Use 450×600mm for secondary access points and perimeter fencing.
How long does marine aluminium last in saltwater?
Our marine-grade aluminium is anodised and typically lasts 10+ years in coastal conditions. Polypropylene is cheaper but will fade and become brittle after 5–7 years in full sun.
Can I customise the text or add a logo?
We supply standard AS 2416.1 pictos. Custom designs are available on request—contact our design team with your brief and budget.
