No Diving Picto Sign
Product code: PSS-WS-PRH-0003
The No Diving pictogram — a red-ringed diving figure with a diagonal slash — is the mandatory warning for shallow-water entry zones. It's required above shallow pool ends, splash pools, above-ground pools, and waterway banks where head-first entry poses spinal-injury risk. AS 2416.1 compliance is non-negotiable in public and private aquatic facilities.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
The No Diving pictogram — a red-ringed diving figure with a diagonal slash — is the mandatory warning for shallow-water entry zones. It's required above shallow pool ends, splash pools, above-ground pools, and waterway banks where head-first entry poses spinal-injury risk. AS 2416.1 compliance is non-negotiable in public and private aquatic facilities.
Material selection reflects exposure: marine aluminium for beaches and open water; polypropylene for pool decks, walls, and sheltered environments. Four sizes span 225 × 300 mm (residential pools) to 600 × 900 mm (large commercial facilities). Pre-drilled holes and lamination options accelerate installation and extend sign life.
Platinum Signs delivers to aquatic centres, councils, and private contractors across Australia. Trade accounts benefit from bulk discounts and priority dispatch. Our team can advise on placement height and visibility to meet your facility's duty-of-care obligations.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-PRH-0003 |
|---|---|
| Product | No Diving Picto Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where exactly should the No Diving sign be mounted?
Mount directly on the pool-deck coping, wall, or railing above the shallow end, positioned at eye level from the pool-entry point. It must be clearly visible before a swimmer enters the water.
What size is standard for residential pools?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Is polypropylene durable enough for outdoor pool decks?
Polypropylene is suitable for outdoor pools in temperate climates, but marine aluminium is recommended for coastal areas with salt spray or UV-intensive regions.
Can I order multiple signs for a large facility?
Yes. Trade accounts receive tiered pricing on bulk orders. Email your facility plan and quantity to our sales team for a customised quote.
Do pre-drilled holes suit all mounting methods?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
