No Bodyboards Sign
Product code: PSS-WS-BCH-0012
This AS 2416.1 prohibition sign marks zones where bodyboarding isn't permitted, commonly deployed alongside No Surfing notices in designated swim-only areas. The red annulus with bodyboard pictogram provides clear visual prohibition that meets Australian water safety standards.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
This AS 2416.1 prohibition sign marks zones where bodyboarding isn't permitted, commonly deployed alongside No Surfing notices in designated swim-only areas. The red annulus with bodyboard pictogram provides clear visual prohibition that meets Australian water safety standards.
Available in polypropylene or marine aluminium across three sizes (300×450 mm through 600×900 mm), with optional pre-drilled holes and lamination for extended durability. Aluminium construction suits permanent beachfront installations exposed to salt spray and UV, while polypropylene offers a cost-effective option for temporary or inland applications.
Trade accounts receive bulk pricing on multi-site deployments. Australia-wide delivery available; contact our team for volume quotes on council or resort-wide rollouts.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-BCH-0012 |
|---|---|
| Product | No Bodyboards Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Can I install this with a No Surfing sign?
Yes — councils and beach managers typically pair both signs to fully mark the no-craft boundary in swim-only zones, creating a complete prohibition framework.
Which material lasts longer in coastal conditions?
Marine aluminium withstands salt spray and UV indefinitely with minimal maintenance. Polypropylene suits 3–5 years in beachfront exposure; consider lamination to extend life.
What size should I order for a typical beach entry point?
Available sizes are 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Do you offer bulk discounts for multiple beaches?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
Can I get pre-drilled holes for pole mounting?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
