Dangerous Current Sign
Product code: PSS-WS-BCH-0006
Rip currents claim more lives than sharks, stingers, and cliff falls combined — SLSA identifies rip-current warning as the highest-impact beach-safety intervention. This AS 2416.1–compliant sign displays the rip-current pictogram (seaward wave arrows) with bold "DANGEROUS CURRENT" legend, deployed at every marked beach access and flanking patrolled-swim zones.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Rip currents claim more lives than sharks, stingers, and cliff falls combined — SLSA identifies rip-current warning as the highest-impact beach-safety intervention. This AS 2416.1–compliant sign displays the rip-current pictogram (seaward wave arrows) with bold "DANGEROUS CURRENT" legend, deployed at every marked beach access and flanking patrolled-swim zones.
Offered in marine-grade aluminium for permanent SLSA clubhouse and council mounts, polypropylene for seasonal coastal deployments, and vinyl for notice-board installation. Sizes 225×300 mm to 600×900 mm suit different beach-entry scales. Platinum Signs supplies trade accounts with volume discounts, Australia-wide delivery, and pre-drilled fixings.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-BCH-0006 |
|---|---|
| Product | Dangerous Current Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where exactly should this sign be installed on a rip-prone beach?
Primary placement at every marked beach access (boardwalk, stairs, bollard). Supplementary markers should flank the patrolled flags (red/yellow) to delineate safe-swim zones. Contact your local SLSA branch for a free placement audit.
Is this sign mandatory for council beaches?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What material withstands coastal salt spray longest?
Marine-grade aluminium (5052 alloy, 1.6 mm) is engineered for saltwater environments and requires minimal maintenance. Polypropylene is budget-friendly for seasonal or temporary deployments.
Can I order signs for multiple beach sites?
Absolutely. We provide volume discounts for multi-site council and SLSA deployments. Email our trade team with your site list for a tailored quote.
Do you supply fixings or mounting hardware?
Signs are pre-drilled to your specification. We recommend stainless-steel fasteners for coastal installs; these are available separately or bundled with your order.
