Maternity Ward Sign
Product code: PSS-INF-HOS-0007
The Maternity Ward sign directs patients and visitors to obstetric and birth-centre areas using ISO 7001 healthcare wayfinding conventions. The 600×125 mm format suits corridor directories and entrance markers in hospitals and nursing homes. Colorbond (0.55 mm) suits outdoor or fence-mounted applications; polypropylene (1.6 mm) is standard for interior walls and doors. Both materials follow AS 1428 accessibility sizing. Trade customers benefit from bulk discounts and Australia-wide delivery. Lamination and pre-drilled holes are available to order.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.73 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $30.00 | — |
| 5-9 | $27.60 | 8% off |
| 10-24 | $25.50 | 15% off |
| 25-49 | $22.80 | 24% off |
| 50-99 | $20.40 | 32% off |
| 100+ | $18.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $30.00 | — |
| 5-9 | $27.60 | 8% off |
| 10-24 | $25.50 | 15% off |
| 25-49 | $22.80 | 24% off |
| 50-99 | $20.40 | 32% off |
| 100+ | $18.00 | 40% off |
Product details
The Maternity Ward sign directs patients and visitors to obstetric and birth-centre areas using ISO 7001 healthcare wayfinding conventions. The 600×125 mm format suits corridor directories and entrance markers in hospitals and nursing homes. Colorbond (0.55 mm) suits outdoor or fence-mounted applications; polypropylene (1.6 mm) is standard for interior walls and doors. Both materials follow AS 1428 accessibility sizing. Trade customers benefit from bulk discounts and Australia-wide delivery. Lamination and pre-drilled holes are available to order.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-INF-HOS-0007 |
|---|---|
| Product | Maternity Ward Sign |
| Category | Information Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 600 x 125mm |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 600 x 125mm |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Which material is best for a corridor directory sign?
Polypropylene (1.6 mm) is the standard choice for interior corridor directories — it's rigid, easy to mount, and resists daily wear. Colorbond is better suited to outdoor or weathered environments.
Does the Maternity Ward sign comply with health-facility standards?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Can I order multiple signs as a set for different wards?
Absolutely. We supply matching sets for multi-ward facilities — order Entry, Exit, Maternity Ward, and other clinical signs together. Bulk pricing applies to combined orders.
How do I mount a 600×125 mm sign securely?
Polypropylene mounts with screws through pre-drilled holes, adhesive, or brackets. We can add mounting holes during production. Colorbond can be bolted to fences or posts.
What is the lead time for bulk orders?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
