Maternity Ward Sign
Product code: PSS-INF-HOS-0024
The Maternity Ward sign directs staff, visitors, and patients to obstetric and postnatal departments using a clear, recognisable pictogram. Sized at 600×125 mm, it's suited to corridor walls, ward entrances, and facility directories in hospitals and birthing centres.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.73 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $30.00 | — |
| 5-9 | $27.60 | 8% off |
| 10-24 | $25.50 | 15% off |
| 25-49 | $22.80 | 24% off |
| 50-99 | $20.40 | 32% off |
| 100+ | $18.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $30.00 | — |
| 5-9 | $27.60 | 8% off |
| 10-24 | $25.50 | 15% off |
| 25-49 | $22.80 | 24% off |
| 50-99 | $20.40 | 32% off |
| 100+ | $18.00 | 40% off |
Product details
The Maternity Ward sign directs staff, visitors, and patients to obstetric and postnatal departments using a clear, recognisable pictogram. Sized at 600×125 mm, it's suited to corridor walls, ward entrances, and facility directories in hospitals and birthing centres.
Polypropylene 1.6 mm is standard for interior walls and doors; colorbond 0.55 mm suits damp or high-traffic environments. Both accept mounting holes and lamination for extended durability. Platinum Signs delivers to trade organisations Australia-wide within 5–7 working days, with bulk discounts available.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-INF-HOS-0024 |
|---|---|
| Product | Maternity Ward Sign |
| Category | Information Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 600 x 125mm |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 600 x 125mm |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign compliant with AS 1319 or AS 1428?
This is an information sign for wayfinding, not a hazard or warning sign. The pictogram follows ISO 7001 and AS 1428 accessibility conventions for sizing and clarity.
Should I choose colorbond if the ward entrance is near a shower or bathroom area?
Yes. Colorbond is moisture-resistant and better suited to humid or damp zones. Polypropylene is adequate indoors away from direct water exposure.
Can you supply matching signs for related departments (e.g. Neonatal, Labour Suite)?
Absolutely. We stock a full range of hospital wayfinding signs. Place multiple items in one order for coordinated delivery and bulk pricing.
What hole size and spacing do you recommend for wall mounting?
Standard 4.5 mm holes at 50 mm from each corner work for most installations. Specify your preferred spacing at checkout, or contact sales for site-specific advice.
Do you offer lamination with a matte or gloss finish?
Standard lamination is gloss. Matte finishes are available on request for bulk orders; confirm at the time of inquiry for lead time and cost.
