Emergency Exit Sign – Printed Identification
Product code: PS-CON080
A static green EMERGENCY EXIT sign for identifying a doorway or final exit point where no directional arrow is needed. Choose the landscape size and material for the mounting surface and viewing position.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Where this no-arrow Emergency Exit sign works
Use this design at the identified doorway or final exit point when the escape direction is already self-evident. It can support emergency-exit identification in workplaces, warehouses, workshops, offices and managed facilities. Use a directional sign at corridors, intersections, stairs or route changes where people still need left, right, up or down guidance.
Printed identification versus a required exit-sign system
This product has no electrical illumination, emergency power or certified photoluminescent performance. The National Construction Code sets separate requirements for required building exit signs. Do not present this printed product as a substitute for an approved exit-sign system unless the responsible building or fire-safety professional has confirmed that application.
Choose the landscape size and material
The three landscape sizes are 300 × 225 mm, 450 × 300 mm and 600 × 450 mm. Polypropylene is the default rigid material for routine use. Self-adhesive vinyl suits a prepared smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Match the size to the approach and surrounding visual clutter.
Placement and emergency planning
Keep the complete EMERGENCY EXIT legend visible with the door open and closed. Avoid positions concealed by shelving, stored materials or temporary notices. Safe Work Australia guidance calls for emergency plans to identify exits and procedures; this sign should reinforce the documented route, not contradict it.
Check the sign format before ordering
This is a static printed Emergency Exit identification sign. It is not an electrical exit luminaire and is not represented as an NCC-compliant photoluminescent exit sign. Required building exit signs must follow the currently adopted National Construction Code and the approved building or fire-safety design. Confirm the application with the responsible building professional.
- Safe Work Australia – Managing the work environment and facilities — The model Code of Practice says workplace exits should be clearly marked and emergency plans should address evacuation arrangements. Read source (opens in a new tab)The model Code has legal effect only where adopted in the relevant jurisdiction.
- National Construction Code 2022 – Part E4, E4D8 — Required exit signs must comply with the applicable NCC exit-sign provisions, including the separate pathway for photoluminescent exit signs. Read source (opens in a new tab)This static printed product is not represented as the required exit-sign system described by E4D8.
- Australian Building Codes Board – NCC legal effect — The NCC is given legal effect through building legislation in each state and territory, including local variations and adoption arrangements. Read source (opens in a new tab)Confirm the adopted NCC edition and jurisdictional requirements for the project.
Before ordering
- Confirm that the exact EMERGENCY EXIT legend and no-arrow format suit the identified doorway or final exit point.
- Confirm whether the location instead requires an illuminated or approved photoluminescent exit-sign system.
- Choose the landscape size for the normal approach distance and surrounding visual clutter.
- Choose the material for the mounting surface, fixing method and expected exposure.
- Check that the installed sign remains visible with the door open and closed and agrees with the emergency plan.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-CON080 |
|---|---|
| Selected SKU | PS-CON080-300X225-PP16 |
| Product | Emergency Exit Sign – Printed Identification |
| Category | Emergency Signs |
| Format guidance | Static no-arrow EMERGENCY EXIT identification sign; use a directional design where the route is not self-evident |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 225mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 300 x 225mm (Small), 450 x 300mm (Medium), 600 x 450mm (Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (5mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What does this Emergency Exit sign identify?
It is a static green-and-white printed sign that identifies an emergency exit point with the exact legend EMERGENCY EXIT. It contains no directional arrow, so use it where the doorway or final exit point is already clear rather than where people still need route guidance.
Can this printed sign replace a required illuminated exit sign?
No automatic compliance claim is made. This product is not an electrical exit luminaire and is not photoluminescent. Required building exit signs must follow the National Construction Code and the approved building or fire-safety design. Confirm the required system with the responsible building practitioner, fire-safety professional or certifier.
When should I use an Emergency Exit sign with an arrow?
Use a directional emergency-exit sign when occupants must turn, change level or continue along a route before reaching the exit. This no-arrow design is intended for the identified doorway or final point. The workplace emergency plan should make the complete route and assembly arrangements clear.
Which material and size should I choose?
Polypropylene is the default rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 225 mm for close-range identification, 450 × 300 mm for a more prominent approach, or 600 × 450 mm for a larger viewing area.
How should the sign be positioned?
Place the complete EMERGENCY EXIT legend where it is visible on the normal approach and remains unobstructed with the door open and closed. Do not use a no-arrow sign at a junction where the route is ambiguous, and do not allow shelving, stored goods or temporary notices to conceal it.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.