Skip to content
Platinum Signs

Platinum Signs

Deep Water Picto Sign

PSS-WS-WRN-0001 · Product data sheet

Data sheet

5 August 2026

https://www.platinumsigns.com.au

Deep Water Picto Sign

Description

An AS 2416.1 warning sign with yellow triangle and depth-figure pictogram (silhouette descending into water column). Essential for pool deep-end walls, quarry edges, canal banks, and council reservoir buffer strips. Paired with depth markers and CPR charts, this sign prevents depth-related swimmer incidents and supports commercial pool compliance. Available in polypropylene (indoor pools, protected sites) or marine-grade aluminium (outdoor exposure, splash zones). Three standard sizes suit deck coping and submerged wall installation. Lamination and pre-drilled holes are included; stainless-steel fixings are recommended for wet environments. Trade accounts enjoy bulk pricing and priority support. Delivery nationwide from Sydney.

Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.

Category
Water Safety Signs
Sign selection
Confirm against site requirements
Artwork
Off-the-shelf design supplied as shown
Product code
PSS-WS-WRN-0001

Available materials

MaterialSpecification
Polypropylene (1.6mm)Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor.
Aluminium (1.6mm)Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites.

Available sizes

  • 300 x 450mm (Medium)
  • 450 x 600mm (Large)
  • 600 x 900mm (Extra Large)

Volume pricing Polypropylene (1.6mm) · 300 x 450mm (Medium) (inc. GST)

QuantityUnit priceSaving
1-4$31.95
5-9$29.39-8%
10-24$27.16-15%
25-49$24.28-24%
50-99$21.73-32%
100+$19.17-40%

Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/water-safety/water-safety-deep-water-picto.

Frequently asked

Where exactly should I mount this sign on a commercial pool?

Install one on the deck coping directly above the deep-end waterline, and a second on the deep-end wall approximately 1 metre below coping level. This ensures visibility from both the deck and in-water positions.

Is this sign alone enough for pool compliance?

No. The deep-water picto must be paired with depth markers on the pool edge, a CPR chart, and a lifeguard-duty sign. Check your state's pool safety code for full requirements.

Can I use polypropylene on an outdoor pool?

Yes, polypropylene is UV-stabilised and suitable for outdoor pools. Aluminium is superior in high-chlorine or saltwater environments and lasts longer in intense sun.

What size is standard for an Olympic-length pool?

Available sizes are 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.

Do you supply matching depth markers?

We stock depth-marker decals and tiles separately. Contact our sales team to discuss a complete pool-safety package including signage, markers, and installation guidance.

Platinum Signs · Product data sheethttps://www.platinumsigns.com.au · PSS-WS-WRN-0001