Platinum Signs
Stop (Black Dots) NSW Only Sign
SS-TRF-032 · Product data sheet
Data sheet
20 September 2026
https://www.platinumsigns.com.au
Description
The Stop (Black Dots) sign is a NSW-specific variant of the standard Stop sign, featuring a distinctive black dot pattern for local road applications. Manufactured to AS 1319 standards, it delivers the same durability and reliability as our other traffic control signs. Available in 600×600 mm, 750×750 mm, and 900×900 mm sizes, each aluminium sign can be upgraded with Class 1 reflective sheeting. Platinum Signs supports NSW councils, contractors, and private operators with trade pricing, bulk discounts, and prompt Australia-wide delivery.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Traffic & Road Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- SS-TRF-032
Available materials
| Material | Specification |
|---|---|
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
Available sizes
- • 600 x 600mm
- • 750 x 750mm
- • 900 x 900mm
Volume pricing — Aluminium (1.6mm) · 600 x 600mm (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $109.95 | — |
| 5 | $101.15 | -8% |
| 10 | $93.46 | -15% |
| 25 | $83.56 | -24% |
| 50 | $74.77 | -32% |
| 100+ | $65.97 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/traffic/stop-black-dots-nsw-only.
Frequently asked
Is this sign only for use in NSW?
Yes, the Stop (Black Dots) variant is NSW-specific and should only be installed within New South Wales. Other states use the standard red octagonal Stop sign.
Does it comply with AS 1319?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What are the three available sizes used for?
600×600 mm is for local streets and driveways, 750×750 mm for standard intersections, and 900×900 mm for busier or higher-speed roads.
Can I order reflective versions?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer bulk pricing for NSW councils or contractors?
Volume-pricing examples are 5 signs: 8% off, 10 signs: 15% off, 25 signs: 24% off, 50 signs: 32% off, 100 signs: 40% off. Savings increase gradually between these quantities. The total increases as you add more signs, while the average price per sign falls or stays the same. The configurator calculates the total for your selected quantity.