Platinum Signs
Danger Explosive Gas No Smoking Sign
PSS-WH-DAN-0022 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
This danger sign communicates the dual hazard of explosive gas and smoking/naked flame risk in a single, clear visual. The red header with white 'DANGER' text satisfies AS 1319 requirements for immediate life-threatening conditions. Install at entry points to gas storage areas, fuel handling zones, and confined spaces with explosive atmospheres. Choose from corflute, Colorbond, or polypropylene in sizes from 300×225 mm to 600×450 mm. Reflective finishes (Class 1 or 2) enhance visibility in dim conditions; lamination extends service life in high-traffic areas. Trade pricing and bulk discounts available. Nationwide delivery with standard 5-day turnaround.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Statutory Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WH-DAN-0022
Available materials
| Material | Specification |
|---|
Available sizes
Frequently asked
Where exactly should this sign be positioned?
Mount at approximately 1.5 m height directly before entry to the hazard zone, ensuring visibility before personnel or visitors access the area. Use multiple signs at each entry point if the zone has several access routes.
What's the difference between Class 1 and Class 2 reflective finishes?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How durable is corflute compared to Colorbond?
Corflute is lightweight and suitable for 3–5 years in moderate conditions. Colorbond steel lasts 10+ years outdoors and resists impact, UV, and harsh weather better.
Can I install this sign myself?
Yes. Pre-drilled hole options are available for screw or bolt fixing. Most sites use standard fasteners; ensure the mounting surface is clean and level.
Do you supply signs for hazardous area classification?
Our danger signs comply with AS 1319 and are suitable for Zone 1 and Zone 2 classified areas. Confirm your specific area classification and any additional regulatory requirements with your safety officer.