Platinum Signs
Staff Only Sign – Workplace Access Notice
PS-HYG015 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Use this Staff Only sign to communicate a clear access instruction at staff rooms, back-of-house areas, stores, plant areas, service corridors and other workplace points intended for staff access. The clean black-and-white landscape artwork carries the exact legend STAFF ONLY, helping customers, visitors and contractors understand the site's instruction before entry. The landscape catalogue sizes are 300 × 225 mm, 450 × 300 mm and 600 × 450 mm. Polypropylene is preselected as the practical rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean, smooth surface; 5 mm Corflute suits temporary or shorter-term placement; and Colorbond steel provides a stronger rigid face for mechanical fixing. Optional mounting holes apply only to rigid materials. Lamination and reflective-film options apply only where the selected material supports them. Position the sign on or immediately before the relevant access point, where the complete wording can be read before someone enters. Check visibility with doors and gates open and closed, remove conflicting or obsolete notices, and repeat the instruction at separate approaches where one sign would not provide clear coverage. This is a general workplace access notice. It communicates the site's staff-only instruction but does not by itself create or enforce a legal boundary, authorise exclusion or physically control access. Where the risk or site rule requires it, combine the sign with locks, barriers, access-control systems, supervision, documented procedures and the other controls selected for the location.
This Staff Only sign communicates a site access instruction. It does not by itself create or enforce a legal boundary, authorise exclusion or replace physical and administrative access controls. Select the sign and supporting measures for the location, risk and applicable duties.
- Category
- Prohibition Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-HYG015
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
Available sizes
- • 300 x 225mm (Small)
- • 450 x 300mm (Medium)
- • 600 x 450mm (Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | -8% |
| 10-24 | $22.95 | -15% |
| 25-49 | $20.52 | -24% |
| 50-99 | $18.36 | -32% |
| 100+ | $16.20 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/prohibition/staff-only.
Frequently asked
What wording is printed on this sign?
The verified artwork carries the exact legend STAFF ONLY in black capitals on a white landscape panel. It gives a direct general access instruction without adding a hazard, penalty or statutory claim.
Where should a Staff Only sign be displayed?
Place it on or immediately before the relevant door, gate, corridor or back-of-house access point, where the full STAFF ONLY legend can be read before entry. Repeat the message at separate approaches when one sign is not visible from every normal access path.
Which material and size should I choose?
Polypropylene is the default rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean, smooth surface; 5 mm Corflute suits temporary placement; and Colorbond steel provides a stronger mechanically fixed face. The landscape sizes are 300 × 225 mm, 450 × 300 mm and 600 × 450 mm.
Does the sign create or enforce a legal boundary?
No. The sign communicates the site's staff-only instruction, but it does not by itself create or enforce a legal boundary or physically control access. Where the risk requires it, use locks, barriers, access-control systems, supervision, site procedures and other controls selected for the location.
Can the sign be supplied with mounting holes?
Optional mounting holes are available on rigid materials. Self-adhesive vinyl installs directly to a clean, smooth and dry surface. Choose fixings that suit the substrate and exposure, and keep the complete legend unobstructed.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.