Platinum Signs
Do Not Walk or Stand on Conveyor Sign
PSS-PRO-004 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Conveyor and machinery hazards demand explicit warning. This prohibition sign displays the AS 1319–mandated red circle-and-slash symbol, clearly forbidding personnel from walking or standing on moving equipment. Engineered on Australian-made substrates—corflute, polypropylene, Colorbond, vinyl—sized from 225×300 mm to 600×900 mm for warehouse, manufacturing, and logistics environments. Lamination and reflective upgrades (Class 1/2) enhance durability and visibility in high-traffic or low-light zones. Platinum Signs supplies trade accounts with volume discounts, fast turnaround, and Australia-wide delivery to keep your site compliant and safe.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Prohibition Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-PRO-004
Available materials
| Material | Specification |
|---|
Available sizes
Frequently asked
Where exactly should this sign be mounted on a conveyor system?
Install at both the entry and exit points of the conveyor run, at eye level (1.4–1.7 m), and ensure nothing obstructs the view from operator positions or nearby walkways.
Is lamination worth the extra cost for a factory floor?
Yes. Lamination protects against oil splashes, moisture, and abrasion from handling, extending sign life by 2–3 years in industrial settings.
What's the best material for a high-temperature production area?
Colorbond or vinyl handle heat and humidity better than corflute; polypropylene sits in the middle. Avoid corflute near heat sources above 60°C.
Do you supply matching mandatory signs (e.g., 'Authorised Personnel Only')?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
How many signs do I need for a long conveyor line?
Minimum: entry and exit points. For lines over 20 m, add intermediate signs every 8–10 m or at junctions where personnel access the belt.