Platinum Signs
AED / Defibrillator Sign – Equipment Location
PS-CON082 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Use this AED / Defibrillator sign to identify the location of an automated external defibrillator in a workplace, office, sports facility, community venue, school, retail centre or other managed site. The portrait green-and-white artwork reads AED and AUTOMATED EXTERNAL DEFIBRILLATOR around a heart-and-lightning pictogram. It contains no directional arrow, so it is intended for the equipment location rather than a turn or route decision. The verified catalogue sizes are 225 × 300 mm, 300 × 450 mm and 450 × 600 mm. Polypropylene is preselected as the practical rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean, smooth surface; 5 mm Corflute suits temporary placement; and Colorbond steel provides a stronger rigid face for mechanical fixing. Optional mounting holes apply only to rigid materials, while lamination is available only with a compatible material shown in the configurator. Install the sign at, above or immediately beside the AED it identifies and keep the complete face visible on the normal approach. Check visibility with nearby doors or cabinet lids open. Where people must turn, change level or continue along a corridor before reaching the unit, use separately verified directional signs at those decision points. This product is the printed sign only. It does not include an AED or cabinet, certify the equipment installation, confirm that the unit is accessible or ready for use, or replace the site's emergency plan, first-aid arrangements, staff information, inspection or maintenance processes. Confirm the equipment location and the site's emergency arrangements before ordering and after any relocation.
This printed sign identifies an AED location. It does not include a defibrillator, certify the equipment installation or replace emergency planning, first-aid arrangements, staff information, inspection or maintenance. Confirm the site-specific equipment location and emergency arrangements before ordering.
- Category
- First Aid & Medical Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-CON082
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | -8% |
| 10-24 | $22.95 | -15% |
| 25-49 | $20.52 | -24% |
| 50-99 | $18.36 | -32% |
| 100+ | $16.20 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/first-aid/aed-defibrillator-sign.
Frequently asked
What is printed on this AED sign?
The approved green-and-white artwork shows the legend AED above a heart-and-lightning pictogram, with AUTOMATED EXTERNAL DEFIBRILLATOR printed below. The artwork has no directional arrow.
Does the sign include an AED or cabinet?
No. This product is the printed location sign only. The defibrillator, cabinet, consumables, installation, inspection and maintenance are separate responsibilities.
Where should the AED sign be installed?
Install it at, above or immediately beside the AED it identifies, where the full sign can be seen on the normal approach. Check visibility with doors or cabinet lids open and avoid positions hidden by furniture, displays or temporary notices.
Can this sign direct people to an AED around a corner?
Not by itself. This artwork has no arrow, so it is intended to identify the equipment location. Add separately verified directional signs at decision points when the AED cannot be seen from the normal approach.
Which material and size should I choose?
Polypropylene is the default rigid option for routine indoor and general site use. Vinyl suits a clean, smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 225 × 300 mm for close-range identification, 300 × 450 mm for greater prominence, or 450 × 600 mm for a larger or visually busy approach.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.