Platinum Signs
T Fire Extinguisher Type A Sign
PSS-WH-FIR-0051 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Type A fire extinguishers are designed for ordinary combustible fires—timber, paper, textiles, and rubbish. This AS 1319–compliant sign marks the equipment with the red panel format, ensuring staff and visitors locate the right extinguisher instantly. Available in four sizes (225×300 mm to 600×900 mm) and four materials, it's suited to offices, retail spaces, warehouses, and community buildings where Class A fires are the primary concern. Corflute suits temporary or low-risk areas; polypropylene is the standard choice for most indoor locations; vinyl offers flexibility for curved walls; Colorbond provides maximum durability and non-combustible performance. All signs use fade-resistant inks; reflective Class 1 and Class 2 options enhance visibility in dim conditions. Trade accounts and bulk orders receive volume discounts, and Platinum Signs delivers throughout Australia.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Fire Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WH-FIR-0051
Available materials
| Material | Specification |
|---|
Available sizes
Frequently asked
What fires does a Type A extinguisher handle?
Type A extinguishers are rated for ordinary combustible fires involving wood, paper, textiles, and general waste. They are not suitable for electrical or flammable liquid fires.
Should I use Type A signs in an office building?
Yes. If your office uses Type A extinguishers as the primary fire safety tool, clear signage is required by AS 1319. This is common in offices, retail, and administrative buildings.
Can I mix extinguisher types and use different signs?
Yes. You can have Type A, Type B, Type E, and wet chemical extinguishers in the same building. Each must be clearly labelled with its own AS 1319–compliant sign.
What reflective finish is best for a dimly lit warehouse?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you supply signs for mixed-use buildings with multiple extinguisher types?
Absolutely. We can bundle different sign types (Type A, B, E, wet chemical) in a single order and often offer package discounts. Request a quote for your full site requirements.