Fire Blanket Sign – Equipment Location

Description

Use this Fire Blanket sign to identify the location of an installed fire blanket in a commercial kitchen, staff facility, workshop, workplace, shared building or other managed site. The verified portrait artwork has a red field, a white-and-black pictogram showing a person placing a blanket over a fire, and the exact legend FIRE BLANKET. It contains no directional arrow, so it is intended to mark the equipment location rather than imply a left, right or straight-ahead route. The verified catalogue sizes are 225 × 300 mm, 300 × 450 mm and 450 × 600 mm in portrait orientation. Polypropylene is preselected as the practical rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean, smooth surface; 5 mm Corflute suits temporary placement; and Colorbond steel provides a stronger rigid face for mechanical fixing. Optional mounting holes apply only to rigid materials, while lamination is available only with a compatible material shown in the configurator. Install the sign at, above or immediately beside the fire blanket it identifies and keep the complete face visible on the normal approach. Check that the equipment remains present, accessible and matched to the site's current fire-safety arrangements after fit-outs, stock movements or kitchen and work-area changes. If the blanket is not visible from a doorway, corridor junction or other decision point, use separately verified directional signs whose arrows match the actual route. This product is the printed sign only. It does not include a fire blanket, cabinet, mounting enclosure, installation, inspection, maintenance, replacement, emergency plan, staff training or certification. The pictogram is an equipment-location symbol, not a substitute for product instructions or competent emergency training, and the sign does not establish that a fire blanket is suitable for a particular hazard. Confirm the equipment selection, location, access, sign position and any building, fire-safety or jurisdictional requirements with the competent people responsible for the site before ordering or installing it.

This printed sign identifies a fire blanket location. It does not select, include, install, inspect, maintain or certify the equipment and does not replace product instructions, emergency planning or staff training. Confirm the site-specific equipment, placement and applicable requirements before ordering.

Category

Fire Signs

Sign selection

Identifies a fire blanket location; the artwork contains no directional arrow.

Artwork

Off-the-shelf design supplied as shown

Product code

PS-FIR011