Platinum Signs
Warning — Use Static Grounding Devices Sign
PSS-ELEC-023 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
This warning sign mandates the use of static grounding devices in environments where static electricity could ignite flammable vapours, gases, or dusts. Commonly required in chemical plants, petrol stations, paint spray booths, and grain handling facilities to reinforce safe work procedures. Available in Colorbond, polypropylene, or vinyl across three sizes (225×300 mm to 450×600 mm). All units include pre-drilled holes for secure mounting. Trade customers receive bulk pricing and Australia-wide delivery to ensure compliance across multi-location operations.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Electrical Safety Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-ELEC-023
Available materials
| Material | Specification |
|---|---|
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | -8% |
| 10-24 | $22.95 | -15% |
| 25-49 | $20.52 | -24% |
| 50-99 | $18.36 | -32% |
| 100+ | $16.20 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/electrical/warning-static-grounding.
Frequently asked
Where is this sign typically required?
Chemical plants, fuel depots, paint booths, and grain stores—anywhere static electricity could ignite flammable atmospheres.
Is this sign a regulatory requirement?
In many hazardous work environments, yes. Check your industry code of practice or consult your safety officer to confirm requirements for your site.
Can I combine this with other electrical safety signs?
Absolutely—many facilities use multiple signs to address different hazards; we can help coordinate a cohesive safety signage strategy.
What material withstands fuel vapour exposure?
Vinyl and polypropylene resist chemical degradation better than some coatings; Colorbond is also suitable if properly maintained.
How often should signs be replaced?
Inspect annually for fading or damage; UV-resistant materials last 3–5 years outdoors before colour loss becomes noticeable.